Crap Outdoors Pt3

And here's what I didn't buy. This was on offer from a reputable provisioner! Shheeeesh fifty squid too. For Shame.

SBW

Unboxing: Byrd Wings Slipit Knife Review

Serrated or not s'rated?

I got this one in a trade a while back and I really like it, not too expensive, bastard-sharp out of the box, and  a handy EDC size. Not the premium knife of the enthusiast, but for the money great value. If you need your EDC to cut a lot of man-made materials i.e nautical or climbing rope, the serrated blade comes into it's own, saving the straight edge for finer work.

More soon
SBW

Unboxing: Boker SubCom F Knife Review

Boker Subcom F [unit of scale .270]

Ahh Subcom. I've been a fan of theses ‘discrete folders’ [AKA ‘small penknives’] for what seems like an age now, but due to the ill thought out BS of UK knife law, locking folders tend to stay in the drawer, so there are always other things to spend the money on.

I needed a dry-bag for a forthcoming trip so I was foraging a forum I frequent for bargains when I noticed I was able to pick this one up, in decent condition, for roughly what I'd have paid in the US of A. Before I knew what was happening it was in the post to me. Opps!

Let the Unboxing commence:

First things first, minimum bid: Any locking folder is judged first on the tolerance of its lock-up. Any play in the blade’s locked position is unacceptable. The Subcom’s lock-up is 100%. Flawless.

Chad Los Banos, the Subcom’s designer, has pulled off the difficult trick of making the ‘littlest big knife’; pocket-able and compact whilst feeling full-sized in the hand. He’s not followed much of the orthodoxy of knife design and as is so often the case the ‘clean sheet’ approach has paid off. The blade is comparatively short, but the cutting edge is comparatively long. The handle is slim but deep, giving the feeling of holding a much bigger shape. Clever stuff.

"either too small or too big, too skinny a blade, and not enough handle to fill the hand." The Subcom series of folders and fixed blades were designed to fill the hand, while remaining small enough to "stay out of your way,"

The Subcom’s blade is AUS8; not the best of the best, but some way up the performance curve from the generic tool steels and lower cost than the super steels. For the price you pay, very good value.

Of all the ways to lock a folding knife, frame-lock is my preferred choice, you get a really solid feeling and the absence of moving parts such as rings or pivots means there is little to wear out or fatigue. Part of the frame is sprung so it locks the blade in the open position. The steel is thinned and heat-treated so it’s flexible enough to be bent out the way letting the blade be folded into the handle. As the blade is opened the sprung section snaps back into the locked position. One of the things that attracted me to the Subcom’s design was the moveable element of the frame is full sized. Quite a few of the production folders use a section of thinner steel as the catch and as a result always seem less satisfying in the hand than the customs, and higher priced production offerings.

Where Boker, the manufacturer, has made a production saving is with the use of Fiber Reinforced Nylon for the ‘scale’ side of the handle, less rigid than G10 or Micarta, it’s had to be stiffened with a thin steel plate, from a manufacturing-to-a-price point of view it’s an intelligent choice and probably a lot of the reason the knife can be such a reasonable price.

In summation: you get about 110% of the design, and about 70% of the build and finish you’d get from a custom folder, for about 10% of the price. Highly recommended. Highly pimpable too… TBC

More soon
Your pal
SBW PS There are more knife reviews in the 'kit' tab at the top of the page, or click HERE for my knife buying guide, you might like it.

Kydex 1.1

OK OK I give in!
This Kydex malarkey isn't as easy as it first appeared, when I had the fit I wanted between to two edges the hold was so tight I needed two hands to unsheathe the knife. So rivets it is. The flaring tool I've got isn't a very good fit for the sexy black rivets the Kydex store sells so I've used a pair in soft aluminum that I found in the shed.

Now if I could only find the big hinges I could make a start on the wood burning stove for TNM's boat.

Thanks for reading
SBW
PS CORRECTION - I'm going to a kids party in the park.

Sgian Dubh

Click here for a full scale picture to get the full effect - awesome work

Been a while since we've had a spot of knife pr0n* on the blog, but while I was researching some Scottish folklore for another project I stumbled upon this handsome little fella. The Sgian Dubh (say it Skein Du) means 'knife dark' in the celtic tongue and is traditionally worn poking from the top of a long woollen sock. 

There are several schools of thought on the history of the SD, with some commentators seeing them as the smaller half of a pair of field knives worn by a Gillie or guide. Others claim the design comes from an earlier concealed carry that was worn inside the sleeve of a shirt or jacket.  An overlapping theory has it that the Sgian Dubh found it's place in the Caledonian tradition as the only EDC permitted after the disarming act of 1746. 

The vast majority of Sgian Dubh seen on the web are purely decorative and part of highland formal dress - basically, they're purely ornamental and you wear 'em at weddings. For locations were there is a prohibition on the wearing of small daggers while copious amounts of alcohol are being consumed one company has launched the Sgian-Brew.

This example is a totally different story:  a 4" blade of Devin Thomas "spirograph" damascus which has been gun blued, given a nickel-silver guard and stabilized ebony handle. It was made by a chap called Mike Mooney of Queen Creek AZ who has won numerous awards for his knife making skills. Have a look - you'll see why.

Your pal

The Bushwacker

PS If you thought custom knives were expensive - wait 'till you see the price of Kilts!!!

*knife pr0n = knives that I'd like to get my hands on but likely never will.

Blogs & Blades 2

Black Rabbit has sent me this picture of the work in progress. I'm lovin' the Hunter blade shape and as you can see he's really got it. We toyed with keeping the rasps of the file but while they look way cool they're a bit of a rust trap, and if the blade were ever to be used for its intended use on an Elk hunt they'd me an excellent breeding ground for bacteria. So this time function will dictate form.
We been batting back and forth ideas about blade thickness; a Mora sometimes looks a little flimsy (proven not to be - but they're SO thin) and the Fallkniven F1 often seems like overkill with its 5 mm of super steel. Black Rabbit's going to work the blade so the spine will retain plenty of metal, while everything towards the cutting edge will be thinned to give the blade a little of the Mora's finesse.

Once again massive thanks Black Rabbit 

Your pal

The bushwacker

Blogs & Blades

'You Cant Always Get What you Want. You can't always get what you want. And if you try sometime you find You get what you need''

A few weeks ago I was sitting in my hotel room, surfing away, looking at the output of customer knife makers. As yer do.
Trying to resist exposing you dear reader to further outbursts of my avaricious 'I Want One - a not so occasional series' posts, and fighting the urge to bankrupt myself when,it was as though the the kit collecting god smiled upon me. 

 I received an email from Black Rabbit who writes the Obsidian Rabbit blog

....... I'd like to ask you to review one of my knives. In return for your time, I'll happily make you the knife to your specifications and send it to you before you write the review - this way you'll be able to play/work with it first, get a feel for it, and be able to form your own honest opinion. Now don't get me wrong - this knife would not be payment for a favourable review - you can say write whatever you want about it, as long as it's fair (but I wouldn't expect anything else) - and after you've posted, the knife remains with you, for keeps.

Well YE HARRRR!!!! I waited all of .00000001 of a second before biting his hand off - right up to the elbow!!!!

So we've been bouncing a few emails back and forth, chewing a few ideas over and the project is coming along nicely. Very nicely.

We looked at three wildly differant ideas:
The Hunter - my favorite interpretation is the fallkniven TK5 and TK6
The BIG Leuku - The Sammi design that's sort of half way point beteen a camp chopper and a machete
The Bushtool - a relatively new design pioneered by Rod Garcia which he calls the skookum bushtool

I've never been remotely interested in the 'woodlore' style bushcraft knife developed by Ray Mears, I'm sure they're great but they just don't speak to me. The bushtool on the other hand looks like something really genuinely different and i've been keen since the first review i saw.

Here's a few of the reviews I've seen over the last couple of years
Bushcraftuk with a field test in the jungle

Britishblades with a moan about the ordering process
Dirt Times review with a bit of background on how Rod Garcia developed the design

karamat (the bushcraft school that hosts Mors Kochanski's training's which inspired the design)
Old Jimbo now hosting the outdoors magazine review

I've only ever seen one traded 'pre loved' and even that was out of my price range. A maker called Mick Spain does his interpretation of the design and it too is both a stunner and unaffordable at this time.

So I was delighted to seize the chance to get my chubby little hands round one. The best thing about having a knife made for you is that all those little details that no one ever seems to get quite right are suddenly solve-able.

Some thoughts:

Not too thick - a thinner blade offers you a little more finesse 

Not wood - handsome rare woods are certainly amazing to gaze at, but a real 'user' will be subjected to the blood and guts of field butchery and may need to be sterilized many times during it's life. Micarta or G10 are the best options for the small scale maker. Micarta is layers of cloth or paper set in resin, G10 is the same idea with fiberglass.

ORANGE - BoB (Brother of Bushwacker) is more of an outdoorsman than any of the armchair warriors posting on the internet even wish they were and he reckons outdoor kit comes in two colors 'where did i put that green? and So that's where it is ORANGE!' 

Deep Choi - the Scandinavian esthetic (popularized by Mors Kochanski) has it that a finger guard only gets in the way. While i agree that it does limit the options for sheath design it also serves the valuable purpose of limiting the potential for a cut finger. Call me a wuss if you like, but I've seen some nasty accidents and had a few not so nasty ones myself. Limiting the potential for disaster is part of the design brief. So a deep 'cut out' that secures the users grip is essential - this one's coming on an Elk hunt and will cut many sandwiches between here and there.

Innovation - Sorry to say this chaps but most knives are just so [yawn] same-old-same-old, the Skookum is different, Raidops aint to everyones taste but his work is different, fallkniven has super cool laminated steel, Wild Steer knives are literally the ugliest thing I've seen since ex-Mrs SBW's sister in law, but at least WSK are trying to do something clever and innovative.  So I was delighted when BlackRabbit tentatively suggested insetting a southern cross into the handle. The Southern Cross is a constellation only visible in the southern hemisphere and a potent symbol of Australia. Different AND it nicely ties the makers work to his locale. 

More news of the project as it comes in

SBW 

PS get Black Rabbits side of the story here

A Tale Of Two Bushmen AKA Bargain Alert

I've been reading the blog written by the American Bushman for ages and marvelling at his knife collection - he doesn't just think 'that looks cool I wonder what it's like to use' he buys one and finds out just exactly how cool each design is. As you probably know after a while it's easy to end up with more stuff than one bushman can practically carry so he's decided to lighten his load by having a bit of a clear out.

Good news for us!

Inspired by the Backyard Bushman's posts about his EDC I've snaffled the Mikro Canadian II by the Bark River Knife and Tool Co. and a few other bits which I'll review as usage allows.
There are still loads of handsome blades for sale - take a look.
Happy Hunting
SBW

Get A Handle On - Restoration

I always think of myself as being 'not all that' at handy crafts so it was a pleasant surprise to see how easy some of them can be. On Friday The Fat Controller gave me a shed he'd found while hiking in the highlands of Scotland. Regular readers will know that BoB brought round a whole box full of knives and assorted kit from our folks place.Lying unloved at the bottom of the box was the knife pictured above. It's handle a particularly unconvincing piece of faux antler (note the 'charming' depiction of a stag!). The blade had several different grinds, in parts flat,and convex, is also pretty soft steel. It was the kind of knife given to lads as a first sheath knife. The sheath itself was pretty cruddy, the leather un-nourished and the stitching failing or failed.
A few hours later and it a whole new story!
Antler is much easier to work than it looks at first sight. I cut off the bottom left tine with a hacksaw, used the side of an angle grinder blade to sand the surface that meets the finger guard, trued it with an orbital sander. It stinks! Like burning fingernails!! Drilled the first hole with 4mm wood bit in a powered screw driver. Making the hole into a slot to take the blades tang looked difficult, but once I'd convex'd the point of a pig-sticker (you know a spike on a handle - don't know its real name) into a mini blade - it was surprisingly easy to get the recess the right size and shape.
I used two-part glue to set the blade to the tine.
The sheath wasn't in good shape so I roughed off any remaining finish and stained it blue, did some lacklustre back stitching, stained it again to cover up the crappy stitching, and using the cooker hob as a heat source melted four coats of boot wax into the leather.I left the retaining strap in the original colour, took out two rivets from the top of the sheath and replaced them with hollow rivets so the knife can be worn dangling as a 'necker'. All it needs now is a boot lace to hang it from.
Now if I could just get on with that Kuksa.

Hope your weekend was as productive for you
Thanks for reading
SBW

Todd’s Desert Scandi

I’ve recently added Todd’s knife making blog, Primitive Point to my blog roll.
Here’s for why;

Over the last year Todd has made a journey as a blade smith and knife maker and his blog details what he’s learned along the way. Part tutorial, part philosophical thesis, he’s obviously gained a lot more than a draw full of cool cutlery from his efforts.

Todd’s based in Arizona and all the materials he uses are gathered from the local environment, for the desert scandi that means a handle of mesquite root: long weathered in the Arizona sun and L-6 steel cut from an old lumber mill saw for the blade.

He’s made numerous other blades from wombled* materials, files, tire irons, rail road spikes and truck springs. His Damascus from cabling is a thing of beauty even before has wrought it into a blade.
For me the attraction of his work is in its usability, these blades aren’t draw queens, kept behind glass by a collector; they are the EDC of the enthusiast. Take ‘em into the backcountry, butcher game, chop vegetables and split wood. Whack ‘em and they just look more ‘lived in’, these are tools that grow more ‘you’ in the using.


‘I just started collecting junk I found while on my walks. I remember finding a steel table base. That eventually became the bottom of my forge. I remember finding a large nail. The head of it become the rivet in my tongs. I started looking and seeing things in new ways. Each year my experience has opened my eyes wider. I now see in ways I never did before. I see what things can become. Recently I wanted some nice wood for some knife handles. I went to an exotic wood store and drooled over their selection. I couldn’t afford any of it, of course. My brother took a trip to Brazil. I asked him to bring me back some wood. He couldn’t because the country is not allowing any wood to be taken out. Finally, something clicked in my brain and I saw the wood that surrounded me, free for the taking. I took out my saw and in no time had a couple dozen really nice mesquite blanks. I found roots and branches and pieces that had lain in the bottom of washes. I found all sorts of patterns and colors in the mesquite within easy walking distance of my house.’

If, like me, you’re now seized by a compulsion to commission a knife. Please let him know you heard about his work here.
Bushwacker

*From the wombles theme song
“Making good use of the things that we find, things that the everyday folks leave behind”
PS He also makes bread!

There’s No Tool Like An Old Tool Or BoB Sends Bushwacker Back In Time!

Things that were covetable become mundane, and then, stained with memory become keys to the past.

As regular readers will know, BoB dropped of a few bits of kit that he’d found while clearing out our folks’ attic. While it was great to see the Opinels again, and a Trangia can only be useful, the real prize was to see my old sheath knife again. The keepers of the family legend are divided as to just how long I’ve had this knife for, if it isn’t 30 years its not far off. As you can see the carbon blade has acquired quite a patina. The tip had a little more acute point when it first came out of the workshop.

The Pommel was a fair bit smoother. But boys will be boys. As dads who were lads ‘ll tell you, boys are tough on their stuff.

As lads we used to play a knife game called ‘splits’. You (well not you, you have more sense, but your teenage self), stand toe-to-toe with your opponent. . Each of you takes it in turn to throw their knife into the ground. Wherever it sticks (not lands, it must be sticks. lands is instant forfeit of the game) the other player must put their foot. Both feet remain flat on the ground – no heeling allowed. All forms of psychological jiggery-pokery are legal. Think of the game as being like Twister with attitude.
Even in the 70’s before 'PC' and ‘Health and Safety’ someone would come and put a stop to it when we were playing in bare feet.

The leather slices that make up the handle have been worn slick by use and by time.
I took a chip out of the first inch of the blade, (guess how that got there!) and I started to run a ceramic file over the gnarls in the pommel, but I stopped. Every ding and scrape is the track left by a tale.

The SharpMaker worked its magic, and the blade is once again shaving sharp. The design makes for a great bushcraft knife, the back of the blade is nicely rounded where you’d want to put your thumb and the false edge up front is acute enough to makes some big sparks from the Swedish firesteel.

Thanks BoB.

Is That A Survival Kit In Your Pocket?

Viridari was kind enough to post a comment on my last post so i visited his site
where i saw this - great isn't it!

Reading a few of his other posts i found out about the Every Day Carry Forum.
A site where guys boast about who has the smallest......
Not something you hear everyday!
Bushwacker

The Opinel – Another Kind Of French Whackin’

Earlier this week BoB (Brother of Bushwacker) passed by the house on his way down under. Amongst the other goodies he brought me were a twenty-year-old stash of Opinels from our childhood bushcraft adventures.

They really are fantastic knives. The design so simple, the edge so keen, the price so low!

The Carbon steel blade
A 20º edge, holds an edge well, and as the scar on my index finger testifies, cuts into flesh and even bone very well.

The Lock
Simplicity itself, the collar twists to hold the blade open. Could there be a simpler way to lock a knife blade in place?

The Beech Handle
This classic of ergonomic design is probably why New York city’s
Museum of Modern Art have added one to their collection.

The Tapping (or whackin') Point - at the end of the blade/far right of the photo
One of the Opinel tricks that every user comes to know well is tapping the handle to open the knife. When the knife is new, or the air is moist, the handle grips the blade a little tighter and its necessary to give the handle a sharp tap on a hard surface to eject the blade. I just never knew it had a name. ‘Le coup du Savoyard’ is the official name the company gives it.

The Opinel Museum and its website



There are now quite a few ‘special purpose’ Opinels available.
My current favorite is this mushroom hunters knife.


Bushwacker

Running Club Isn't The Only Uphill Struggle

Mrs Bushwacker has been taking a sudden interest in my blog and blogging activities.
She looked into my recent conversation with the American Bushman regarding the usefulness of crooked knives.

Mrs SBW “what do you use them for?”
SBW“ They’re essential for making spoons and kuksas”
Mrs SBW “You idiots, you can just buy them at Tescos”

What was I saying about bear bait?
Bushwacker
Bear Claws Bushcraft are getting kuksas
Nordic Bushcraft have them in stock

Cut To The Chase

There are only two things you need for great food, really fresh ingredients and really, really, sharp knives.

As regular readers will know I pendulum between the futurist and atavist positions on most things and knives are no exception. Over the last few months I’ve been fetishising Tom Brown Jnr’s $260 T2 Tracker knife – but I didn’t buy one..............

CHOOSING:
A word as to knife, or knives. These are of prime necessity, and should be of the best, both as to shape and temper. The "bowies" and "hunting knives" usually kept on sale, are thick, clumsy affairs, with a sort of ridge along the middle of the blade, murderous looking, but of little use; rather fitted to adorn a dime novel or the belt of "Billy the Kid," than the outfit of the hunter.
George Washington Sears AKA ‘Nessmuk’ writing in the1880’s

For ‘murderous’ read ‘tactical’ and Nessmuk, Field and Streams venerable canoe camping correspondent, could be blogging today. I reckon he would have pissed himself laughing at the camo coatings offered on so many of today’s outdoor and hunting tools. I love my camo as much as the next redneck, but in the field ‘camo’ is often a pseudonym for ‘never seen again’.

Another trend in knife design is wooden handle and steel blade, held together with brass pins. Nowadays known as the ‘Woodlore’ style, popularised by Ray Mears. While these knives do have an attractive handmade-ness, they can be silly money. Perhaps I’m a bit of a pikey but at up to $440 I wouldn’t want to use a blade for duties any more demanding than letter opening!

Between the extremes of ‘weapon’ and ‘handicraft’ I did find a style that suited me. The ‘pry-bar with an edge’ AKA the ‘survival knife’.

After a scouting around on the web for a while. And choosing to impose a limit of $100, (I say ‘choosing’ it was actually fear of Mrs Bushwacker that made me impose it). I came to a choice of design philosophy between- America* and Sweden, the Gerber LMF II for serious mass production and Fallkniven F1 for serious seriousness.

*I know Gerber’s parent company is Finish – if I’m not pedantic enough for you write your own blog

Both designs pride themselves on being strong enough to stab straight into the side of an oil drum. I don’t know what the manufactures had in mind, but I know a barbequing opportunity when I see one!

Fallkniven, which means folding knife in Swedish, designed their knife for pilots who have made an unplanned change from flying, to shanks pony (walking) in sub-arctic conditions. The handle grips against skin or gloves whatever the temperature. The blade is in the 'drop-point' style and a practical 3.5inches long. Made from a stainless steel called VG 10 with a full tang, (the blade goes all the way through the handle), and has a pommel or sticky-out-bit at the end of the handle so you can give it a proper whack when handcrafting your new oil barrel barbeque, splitting logs or boar’s skulls.

Gerber, which means baby food in my house, designed their knife for infantry folk or at least for infantry wannabes. They gave their knife a more substantial pommel, nice, but chose to separate it from the blade, purportedly so as to reduce the shock felt when using it as a hammer. Unfortunately this ‘innovation’ means the handle has to be stronger rather than grippyer. Gerber Hmmmm.
In fairness I did like the idea of a sharpener built into the sheath, but that annoying serrated bit by the finger guard is in exactly the wrong place on the knife. It’s positioned just where a sharp plain edge is most useful for fine work like making tinder sticks. Still it does help give it that ‘tactical’ look. For me the tinder sticks would be more useful than looking ‘murderous’ when in the field.

OPTIONS:
Fallkniven give you three options for the knife and three for the sheath.

Knives
1. Plain blade with a Thermorun handle. Simple: utilitarian, grippy, and sterilize-able in a saucepan of water. Just the thing for my Elk hunt.
2. As above: but with a black blade. A bit too ‘tactical’ for me.
3. Plain blade with a Micarta handle and a nickel silver finger guard.
A very nice mix of useable and hand finished, nearly got my vote.

Sheaths
1.Drop in Scandinavian style sheath – now discontinued but available on Eay.
2.Flap closure style. The standard version, you wont lose it or have to pay any extra.
3.Moulded Zytel with a popper fastener. I like synthetic sheaths, but I’ve seen them done better.

BUYING:
Even though I’m in London, only 1762.65 miles from the Fallkniven factory.
The ‘sharpest’ price I found was from BestKnives.com in the USA. $98.95 or about £50 (they have the Gerber LMF II for $76.95 i.e £36 – pretty good as I’ve seen it in rip-off Brittan for £100+). These guys are cheapest or second cheapest for most knives, they ship promptly, and give you a UPS number to track your shipment with.

POST PURCHASE:
I’m lovin’ it!
I’ve used the knife for a few rough jobs; opening gummed up tins of paint, scratching out putty and broken glass. I’ve beaten it into some logs, cut some fire wood and shaved some tinder sticks. It would never be my first choice in the kitchen or for butchery, but its not designed to be, so fair play.
It takes a reasonable edge pretty easily and holds it well. Due to a lack of skill on my part I’m yet to get it sharp enough to pass the wet cigarette paper test.
Some people have re-ground theirs from the convex edge to a flatter blade profile, which will undoubtedly make for a much finer but more delicate edge. I’m not sure that I’ll bother. While I like the idea of it being a bit sharper. I kinda feel that it would miss the point, you can get all the knife you’ll ever need for fine work for $10 (Frosts – also of Sweden). The F1 is for making shelters, splittin’ firewood, and making showers of sparks. All things it does flawlessly. I have never seen any edge that makes more or bigger sparks from a firesteel. Really this you have to see!
The only modification I’ve made so far is to rub the handle down with fine cabinet paper. My guess is that like with new bike tyres, there is still some of the release agent left from the mould and a light sanding made the handle much more grippy.

PS after a while I'd blunted the blade and sent it back for a refurb there's what happened

Full Description http://www.fallkniven.com/a1f1/f1_en.htm

How Strong? http://www.fallkniven.com/test.htm

Best Price http://bestknives.stores.yahoo.net/faf1misukn.html

If You Must http://www.gerbergear.com/product.php?model=1400

Keep ‘em peeled. Bushwacker.